VETRON 4000 Instruction Manual page 9

01.01. SAFETY INSTRUCTIONS
-2-2
ADVICE TO THE OWNER
» As part of the machine, this operating manual must be available to operating personnel at all times. Before using
the machine for the first time, the operator must read this operating manual.
» The operator has to ensure that the machine is only operated in perfect condition.
» The operator must ensure that no safety devices are removed or disabled.
» The operator must ensure that only authorized or properly instructed persons work on the machine.
» The operator must therefore ensure that the workstations according to ASR lux. 4 are adequately illuminated (min.
750 lux).
OPERATORS AND TECHNICAL STAFF
» The operating personnel are responsible for setting up, operating and cleaning the machine and responsible for the
elimination of faults.
» Qualified personnel include people with specialist training in electrical / electronics, pneumatics and mechanics.
 Lubrication, maintenance, repair and adjustment are your responsibilities.
» The operator must refrain from any operation that impaires the safety on the machine.
1. Jewelry, chains and rings - must not be worn.
2. The clothes should be tight
3. Only authorized persons may enter the danger area.
» If changes occur to the machine that a ect safety, they must be reported immediately to the operator.
» The specialist personnel - persons with training in electrical / electronics and mechanics - are responsible for the
lubrication, maintenance, repair and adjustment of the machine.
» Before starting adjustment and repair work, the main switch must be switched o and secured against reclosing.
» Work on parts that are under tension should be avoided. Exceptions are regulated by EN 50110. After maintenance
and repair work, the protective covers must be replaced.
» Operating and specialist personnel are obliged to observe the safety instructions given in the instructions for use
during all work.
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
05/2022
07