Touch Display - VETRON 4000 Instruction Manual

02.07. TOUCH DISPLAY

-1-2
NOTE:
Settings are made in various areas on the touch display.
E.g. basic setting, system operation, parameter setting and program creation.
For operation on the touch display, see the enclosed operating instruction book YSC -90A0 Servo System.
11
12
13
14
15
16
No KEY
1 Lock key (Physical button)
2 Configuration (Physical button)
3 Return (Physical button)
4 Pedal type
5 USB stick
6 Authorize
7 Clock
Bobbin thread counter or
8
speed display
9 Locked status
10 Values
11 Program setting
12 Stitches setting
13 Start back tack
14 Seam display
15 End back tack
05/2022
20
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
4 5
17 18
DISCRIPTION
Lock / unlock touch display
Enter config interface
Return to the previous interface
The icon will be shown if standing pedal is selected
The icon will be shown if a USB-stick is inserted
Enter the authorize interface
Time
This area will be shown if the bobbin thread counter is active or the
speed adjustment is active. Otherwise, it will be hidden
The icon shows the status of the touch display
Increase / decrease the edibale value. It will be hiodden when there is
no edit
Program setting key. Enter program setting interface, (refer to 06.02)
Increase or decrease the number of stitches in segments A, B, C, D
with + / -
Selection: O , Single, Double, Multiple
Shows current seam
Free sewing, programmed sewing (displays the seam section that is
being sewn).
Selection: O , Single, Double, Multiple
6 7 8 9
+
-
19 20 21 22 10
1
2
3