Table of Contents
Advertisement
03.01.01. INSERTING THE NEEDLE (2-NEEDLE)
1
2
CAUTION! RISK OF INJURY!
Stitch and crush hazard in the sewing area
You can switch o the machine at the main switch or activate the „LOCKED MODE" by pressing the lock
button (X-button) on the function bar before changing the needle. The threading symbol is shown in the
display.
NOTE
Only use needles from the system intended for the machine.
(Needle system 134-35)
01. Push the lock button (X-button) on the function bar. The green light illuminates showing the active „LOCKED MODE",
or turn the machine o .
1
02. Loosen the screw
03. Push the needle
in as far as it will go. Make sure that the groove
2
the left needle to the left.
04. Tighten the screw
1
05. Push the lock button (X-button) or switch the machine on again.
1
2
.
again.
of the right needle points to the right and
3
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
3
05/2022
23
Advertisement
Table of Contents
