Table of Contents
Advertisement
03.02. THREADING THE MACHINE (1- / 2-NEEDLE)
1
CAUTION! RISK OF INJURY!
Stitch and crush hazard in the sewing area
You can switch o the machine at the main switch or activate the „LOCKED MODE" by pressing the lock
button (X-button) on the function bar before threading the machine. The threading symbol is shown in the
display.
» Make sure that the thread takeup lever
» Now you can thread the machine according to the picture.
» If the thread tension is set too low, the stitch pattern will be poor.
» If the thread tension is set too high, the stitch pattern will be poor and the thread will break
ADVICE!
Push the lock button (X-button) on the function bar to end the „LOCKED MODE" or switch the machine on again.
05/2022
24
VETRON 4000 - FLAT BED MACHINE - INSTRUCTION BOOK
1
1
is in its top dead position
Advertisement
Table of Contents
