INSTRUCTION BOOK
10. PROGRAM CHANGE
NOTE!
Inside the seam it is not possible to change the program. Press the pedal back to
thread trimming position to activate the function if necessary.
01. Push the JOG KEY
10
.
02. The current program number is fl ashing.
03. Turn the JOG KEY to the left or right to choose the desired program number.
04. Confi rm your choice by pushing the JOG KEY again.
05. The machine is now ready for use.
08/2017
14
VETRON 5000/5100 - FLAT BED MACHINE
P
000
30%
T
E T
S
ESC
10