Program Change - VETRON 5390 Instruction Manual

P 000 30%
T E T S
NOTICE!
Inside the seam it is not possible to change the program. Press the pedal back to thread
trimming position to activate the function if necessary.
01. Push the JOG KEY 10 .
02. The current program number is fl ashing.
03. Turn the JOG KEY to the left or right to choose the desired program number.
04. Confi rm your choice by pushing the JOG KEY again.
05. The machine is now ready for use.
02. MACHINE DESCRIPTION
ESC
VETRON 5390 - POST BED MACHINE - INSTRUCTION BOOK

09. PROGRAM CHANGE

1
07/2018
19