Program Change - VETRON 5000 Instruction Book

INSTRUCTION BOOK

10. PROGRAM CHANGE

NOTE!
Inside the seam it is not possible to change the program. Press the pedal back to thread trimming
position to activate the function if necessary.
Push the JOG KEY .
10
The current program number is fl ashing.
01. Turn the JOG KEY to the left or right to choose the desired program number.
02. Confi rm your choice by pushing the JOG KEY again.
03. The machine is now ready for use.
14 INSTRUCTION BOOK VETRON 5000
P 000 30%
T E T S
ESC
10