Program Change - VETRON 5300 Instruction Book

P 000 30%
T E T S
NOTICE!
Inside the seam it is not possible to change the program. Press the pedal back to thread
trimming position to activate the function if necessary.
01. Push the JOG KEY 10 .
02. The current program number is flashing.
03. Turn the JOG KEY to the left or right to choose the desired program number.
04. Confirm your choice by pushing the JOG KEY again.
05. The machine is now ready for use.
02. MACHINE DESCRIPTION
ESC
VETRON 5300 - POST BED MACHINE - INSTRUCTION BOOK

09. PROGRAM CHANGE

1
07/2020
23