Table of Contents
Advertisement
08. ADJUSTMENT
02. PNEUMATIC CONNECTION
WARNING!
Danger by compressed air
Disconnect the machine from the electrical network before any adjustment work!
Risk of injury if the machine starts up unintentionally.
PRESSURE SETTING:
01. Connect the machine to the compressed air system.
02. The operating pressure at the filter control valve
03. The pressure of the anvil wheel on pressure control valve
02/2021
52
Vetron 5374 HotAir-Welding
1
is 6 bar.
1
2
is factory set to 3.5 bar.
2
Advertisement
Table of Contents
