Changing The Position Light Lamp; Changing The Turn Signal Bulb - GAS GAS ES 700 2023 Owner's Manual

14 ELECTRICAL SYSTEM
14.10
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
14.11
Note
Impairments to reflectors and lamps Grease on the reflector reduces the emitted light.
Grease on the bulb will evaporate due to the heat and be deposited on the reflector.
Grease residue on the bulb reduces heat dissipation and increases the heat of the bulb, thus reducing its service life.
–
Clean and degrease the bulbs before mounting.
–
Do not touch the bulbs with your bare hands.
94

Changing the position light lamp

V02741-11
V02743-10

Changing the turn signal bulb

Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove bulb socket .
–
2
Pull position light lamp
–
Insert a new position light lamp in the bulb socket.
Position light (W5W / socket W2.1x9.5d) (
–
Insert the bulb socket in the reflector.
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
p. 92)
out of the bulb socket.
p. 121)
p. 92)
p. 95)