16.3
Checking the basic position of the shift lever
Info
When driving, the shift lever must not touch the rider's boot when in the basic position.
If the shift lever is permanently touching the boot, the transmission will be subject to excessive load; this can cause
a malfunction of the quickshifter (optional).
16.4
Adjusting the basic position of the shift lever
–
Sit on the vehicle in the riding position and determine distance
between the upper edge of your boot and the shift lever.
Distance between shift lever
and upper edge of boot
»
If the distance does not meet specifications:
–
Adjust the basic position of the shift lever.
400692-10
–
1
Remove screw
401950-12
–
Clean gear teeth
–
Mount shift lever
engage the gearing.
Info
The range of adjustment is limited.
The shift lever must not come into contact with any other
vehicle components during the shift procedure.
–
Mount and tighten screw
401951-10
Guideline
Screw, shift lever
TUNING THE ENGINE 16
10 ... 20 mm (0.39 ... 0.79 in)
with the washers and take off shift lever
A
of the shift lever and shift shaft.
2
on the shift shaft in the required position and
1
with washers.
M6
14 Nm (10.3 lbf ft)
A
(
p. 105)
2
.
Loctite
®
243™
105