14 ELECTRICAL SYSTEM
14.5
90
Changing the ABS fuses
Warning
Fire hazard Incorrect fuses overload the electrical system.
–
Only use fuses with the required ampere value.
–
Do not bypass or repair fuses.
Info
Two fuses for the ABS are located under the seat. These fuses protect the return pump and the hydraulic unit of the
ABS. The third fuse, which protects the ABS control unit, is located in the fuse box.
W00150-10
W00150-11
Finishing work
–
Mount the seat. (
p. 53)
–
Set the clock. (
p. 27)
Preparatory work
–
Remove the seat. (
p. 53)
–
Pull the engine control unit off the holder and set it to one side.
–
Remove the retaining bracket.
To change the fuse of the ABS hydraulic unit:
–
Take off protection cap
–
Insert a new fuse.
Fuse (58011109115) (
–
Mount the protection cap.
To change the fuse of the ABS return pump:
–
Take off protection cap
–
Insert a new fuse.
Fuse (58011109125) (
–
Mount the protection cap.
Finishing work
–
Mount the retaining bracket.
–
Position the engine control unit.
–
Mount the seat. (
p. 53)
1
and remove the fuse.
p. 121)
2
and remove the fuse.
p. 121)