Table of Contents
Advertisement
10 TUNING THE CHASSIS
10.16
10.17
44
Handlebar position
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
Info
The handlebar can be mounted rigidly or on a rubber bearing.
The holes on the handlebar support
from the center.
Hole distance A
The handlebar can be mounted in 2 different positions. This allows the
handlebar to be mounted in the most comfortable position for the rider.
Info
In addition, the handlebar can be mounted rigidly or on a rubber
bearing.
F03636-10
Preparatory work
–
Take off the handlebar cushion.
1
are placed at a distance of
3.5 mm (0.138 in)
A
Advertisement
Table of Contents
