10 TUNING THE CHASSIS
10.14
10.15
10.16
34
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
Handlebar position
Adjusting the handlebar position
Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
–
1
Turn adjuster
Info
Adjuster
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Rebound damping
F02972-10
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
On the upper triple clamp, there are 2 holes at a distance of
other.
A
Hole distance
The holes on the handlebar supports are placed at a distance of
from the center.
B
Hole distance
The handlebar supports can be mounted in four different positions. This
C00248-10
allows the handlebar to be mounted in the most comfortable position
for the rider.
clockwise all the way.
1
is located at the upper end of the right fork leg.
15 clicks
12 clicks
10 clicks
15 mm (0.59 in)
3.5 mm (0.138 in)
A
to each
B