Table of Contents
Advertisement
15 COOLING SYSTEM
15.1
15.2
98
Cooling system
Checking the antifreeze and coolant level
Warning
Danger of scalding During motorcycle operation, the coolant gets very hot and is under pressure.
–
Do not open the radiator, the radiator hoses or other cooling system components if the engine or the cooling
system are at operating temperature.
–
Allow the cooling system and the engine to cool down before you open the radiator, the radiator hoses or
other components of the cooling system.
–
In the event of scalding, rinse the area affected immediately with lukewarm water.
Warning
Danger of poisoning Coolant is harmful to health.
–
Keep coolant out of the reach of children.
–
Do not allow coolant to come into contact with the skin, the eyes and clothing.
–
Consult a doctor immediately if coolant is swallowed.
–
Rinse the affected area immediately with plenty of water in the event of contact with the skin.
–
Rinse eyes thoroughly with water and consult a doctor immediately if coolant gets into the eyes.
–
Change clothing if coolant spills onto your clothing.
1
Water pump
in the engine ensures forced circulation of the coolant.
The pressure resulting from the warming of the cooling system is reg-
ulated by a valve in radiator cap
coolant to flow into compensating tank
falls, this surplus coolant is sucked back into the cooling system. This
ensures that operating the vehicle at the specified coolant temperature
will not result in a risk of malfunctions.
125 °C (257 °F)
V02696-10
The coolant is cooled by the air stream and radiator fan
activated depending on the temperature.
The lower the speed, the less the cooling effect. Dirty cooling fins also
reduce the cooling effect.
400407-10
Condition
The engine is cold.
2
. Heat expansion causes excess
3
. When the temperature
4
, which is
Advertisement
Table of Contents
