Abs Button; Overview Of Indicator Lights - GAS GAS ES 700 2023 Owner's Manual

6.11

ABS button

6.12

Overview of indicator lights

1
The ABS button
left.
Info
The ABS button is also used as the ABS warning lamp (
S02157-10
Possible states
ABS warning lamp lights up/flashes yellow – If the
ABS warning lamp lights up, the ABS is not active. The ABS
warning lamp also lights up if an error is detected. Contact
an authorized GASGAS Motorcycles workshop.
The high beam indicator lamp lights up blue – The high
beam is switched on.
Fuel level warning lamp lights up orange – The fuel level
has reached the reserve mark.
Malfunction indicator lamp lights up orange – The OBD has
detected an error in the vehicle electronics. Come safely
to a halt, and contact an authorized GASGAS Motorcy-
cles workshop.
The coolant temperature warning lamp lights up red – The
coolant temperature has reached a critical value. Stop
immediately (taking care not to endanger yourself or other
road users in the process), switch off the engine, allow it to
cool down and check the coolant level.
The idle indicator lamp lights up green – The transmission
is in neutral.
S03254-01
Turn signal indicator lamp flashes green – The turn signal is
switched on.
The oil pressure warning lamp lights up red – The oil
pressure is too low. Stop immediately, taking care not to
endanger yourself or other road users in the process, and
switch off the engine.
TC indicator lamp lights up/flashes yellow – If the TC indi-
cator lamp lights up, the MTC (
TC indicator lamp and both riding mode lamps light up at
same time, an error has been detected. Contact an autho-
rized GASGAS Motorcycles workshop. The TC indicator
lamp flashes if the MTC actively engages.
is fitted next to the combination instrument on the
p. 38) is not active. If the
CONTROLS 6
p. 66).
21