–
Check that spring plate
6
ing plate
in the brake caliper bracket are seated correctly.
–
Insert the new brake linings, insert the pin, and mount the cotter
pins.
Info
Always change the brake linings in pairs.
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
400419-11
–
Correct the brake fluid level to marking MAX.
Brake fluid DOT 4 / DOT 5.1 (
–
Mount the screw cover with washer and the membrane.
Info
Use water to immediately clean up any brake fluid that has
overflowed or spilled.
BRAKE SYSTEM 12
5
in the brake caliper and brake pad slid-
p. 127)
77