GAS GAS ES 700 2023 Owner's Manual page 64

Table of Contents

11 SERVICE WORK ON THE CHASSIS

–

Check the chain sliding piece for wear.

If the lower edge of the chain pins is in line with or below the

chain sliding piece:

–

Change the chain sliding piece.

–

Check that the chain sliding piece is firmly seated.

If the chain sliding piece is loose:

–

Tighten screw on the chain sliding piece.

Guideline

Screw, chain

sliding piece

S02195-01

–

Check the chain guide for wear.

Info

Wear can be seen on the front of the chain guide.

If the light part of the chain guide is worn:

–

Change the chain guide.

400985-01

–

Check that the chain guide is firmly seated.

If the chain guide is loose:

–

Tighten the screws on the chain guide.

Guideline

Remaining screws,

chassis

101068-01

Finishing work

–

Remove the motorcycle from the lift stand. (

15 Nm (11.1 lbf ft)

Loctite

10 Nm (7.4 lbf ft)

p. 51)

243™

Table of Contents