Adjusting The Rebound Damping Of The Fork; Handlebar Position; Adjusting The Handlebar Position - GAS GAS MC 125 2022 Owner's Manual

10 TUNING THE CHASSIS
10.15
10.16
10.17
40

Adjusting the rebound damping of the fork

Info
The hydraulic rebound damping determines the fork suspension behavior.

Handlebar position

Adjusting the handlebar position

Warning
Danger of accidents A repaired handlebar poses a safety risk.
If the handlebar is bent or straightened, the material becomes fatigued. The handlebar may break as a result.
–
Change the handlebar if the handlebar is damaged or bent.
Info
Turn clockwise to increase damping; turn counterclockwise
to reduce damping during compression.
–
Turn adjusting screw
Info
Adjusting screw
fork leg.
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Z01370-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
The holes on the handlebar supports are placed at a distance of
from the center.
Hole distance A
The handlebar can be mounted in 2 different positions. In this way, the
handlebar can be mounted in the most comfortable position for the
rider.
H01188-10
Preparatory work
–
Remove the handlebar cushion.
1
clockwise all the way.
1
is located at the lower end of the right
17 clicks
12 clicks
7 clicks
3.5 mm (0.138 in)
A