14.15
ACC1 and ACC2
14.16
Diagnostics connector
–
Position protection cap
coin.
–
Press any button on the combination instrument.
The combination instrument is activated.
–
Position the combination instrument in the holder.
–
Mount and tighten the screws with washers.
–
Join plug-in connector
–
Position the wiring harness and fasten it with cable ties
S03314-10
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
–
Set to kilometers or miles. (
–
Set the clock. (
Installation location
–
The power supplies ACC1
headlight mask.
S03334-10
Diagnostics connector
V02745-10
ELECTRICAL SYSTEM 14
4
and turn all the way clockwise using a
2
.
p. 95)
p. 26)
p. 27)
1
2
and ACC2
are located behind the
1
is located under the engine control unit.
1
.
p. 92)
97