Table of Contents
Advertisement
10.15
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
10.16
Handlebar position
–
Turn adjusting screw
Info
Adjusting screw
fork leg.
–
Turn counterclockwise by the number of clicks corresponding to the
fork type.
Guideline
Z01370-10
Rebound damping
Comfort
Standard
Sport
Info
Turn clockwise to increase the damping; turn counterclock-
wise to reduce damping when the shock absorber rebounds.
On the upper triple clamp, there are 2 holes at a distance of
other.
Hole distance A
The holes on the handlebar support are placed at a distance of
the center.
Hole distance B
The handlebar can be mounted in four different positions. This allows
the handlebar to be mounted in the most comfortable position for the
rider.
M00993-10
TUNING THE CHASSIS 10
1
clockwise all the way.
1
is located at the lower end of the right
23 clicks
18 clicks
13 clicks
15 mm (0.59 in)
3.5 mm (0.138 in)
A
to each
B
from
41
Advertisement
Table of Contents
