Removing The Front Fender; Installing The Front Fender - GAS GAS ES 700 2023 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.15
11.16
56
V02735-11

Removing the front fender

S03291-10

Installing the front fender

S03292-10
–
5
Mount and tighten screws
Guideline
Screw, radiator shield
–
Repeat these steps on the opposite side.
Finishing work
–
Mount the seat. ( p. 53)
Preparatory work
–
Remove the headlight mask with the headlight. (
Main work
–
1
Remove screws .
–
2
Remove screws and take off the fender.
Main work
–
Position the front fender. Mount and tighten screws
Guideline
Remaining screws,
chassis
–
2
Mount and tighten screws
Guideline
Remaining screws,
chassis
Finishing work
–
Install the headlight mask with the headlight. (
–
Check the headlight setting. (
.
M6x20 4.5 Nm (3.32 lbf ft)
p. 92)
1
.
M6 10 Nm (7.4 lbf ft)
.
M6 10 Nm (7.4 lbf ft)
p. 92)
p. 95)