Checking The Rear Hub Damping Rubber Pieces - GAS GAS ES 700 2023 Owner's Manual

13 WHEELS, TIRES
13.5
82

Checking the rear hub damping rubber pieces

Info
The engine power is transmitted from the rear sprocket to the rear wheel via the 6 damping rubber pieces. They
eventually wear out during operation. If the damping rubber pieces are not changed in time, the rear sprocket car-
rier and the rear hub will be damaged.
–
Position the brake line in the guide.
–
Operate the foot brake lever repeatedly until the brake linings are in
contact with the brake disc and there is a pressure point.
V02737-10
Finishing work
–
Remove the motorcycle from the lift stand. (
–
Check the chain tension. (
Preparatory work
–
Raise the motorcycle with a lift stand. (
–
Remove the rear wheel.
Main work
–
1
Check bearing
» If the bearing is damaged or worn:
–
Change the bearing of the rear sprocket carrier.
–
Check damping rubber pieces
wear.
» If the damping rubber pieces of the rear hub are damaged or
worn:
–
Change all the damping rubber pieces of the rear hub.
V02738-10
–
Lay the rear wheel on a workbench with the rear sprocket facing
upwards and insert the wheel spindle in the hub.
–
A
To check play
sprocket with your hand.
Info
Measure the play on the outside of the rear sprocket.
Play of damping rubber pieces
V00511-10
on rear wheel
»
If clearance
–
Change all the damping rubber pieces of the rear hub.
Finishing work
–
Install the rear wheel.
–
Remove the motorcycle from the lift stand. (
–
Check the chain tension. (
p. 59)
p. 50)
( p. 79)
.
2
of the rear hub for damage and
, hold the rear wheel tight and try to turn the rear
≤ 5 mm (≤ 0.2 in)
A
is larger than the specified value:
( p. 80)
p. 59)
p. 51)
p. 51)