Table of Contents
Advertisement
11.24
Adjusting chain guide
11.25
Checking the rubber grip
–
Remove screws
Condition
Number of teeth: ≤ 44 teeth
–
3
Insert nut
–
Mount and tighten screws
Guideline
Screw, chain guide
Condition
Number of teeth: ≥ 45 teeth
–
3
Insert nut
–
Mount and tighten screws
Guideline
Screw, chain guide
S02196-10
–
Check the rubber grips on the handlebar for damage, wear, and
looseness.
Info
The rubber grips are vulcanized onto a sleeve on the left and
onto the handle tube of the throttle grip on the right. The
left sleeve is clamped onto the handlebar.
The rubber grip can only be replaced with the sleeve or the
throttle tube.
401197-01
»
If a rubber grip is damaged or worn:
–
Change the rubber grip.
–
Check that screw
Guideline
Screw, fixed grip
A
Diamond
W00116-10
SERVICE WORK ON THE CHASSIS 11
1
2
and
. Take off the chain guide.
A
in hole
. Position the chain guide.
1
2
and
.
M6
B
in hole
. Position the chain guide.
1
2
and
.
M6
1
is firmly seated.
M4
5 Nm (3.7 lbf ft)
must be located at the top.
10 Nm (7.4 lbf ft)
10 Nm (7.4 lbf ft)
Loctite
®
243™
63
Advertisement
Table of Contents
