Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Smeg LBS107F
Summary of Contents for Smeg LBS107F
- Page 1 LBS107F Washing Machine Lavatrice...
-
Page 2: Important Safety Instructions
1 Important safety instructions This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. General safety • This product should not be used by persons with physical, sensory or mental disorders or unlearned or inexperienced people (including children) unless they are attended by a person who will be responsible for their safety or who... -
Page 3: Appropriate Installation Location
2 Installation Refer to the nearest Authorised Service Agent for installation of the product. To make the product ready for use, review the information in the user manual and make sure that the electricity, tap water supply and water drainage systems are appropriate before calling the Authorized Service Agent. If they are not, call a qualified technician and plumber to have any necessary arrangements carried out. Preparation of the location and electrical, tap water and waste water installations at the place of installation is under customer's... -
Page 4: Connecting To The Drain
3. Open the taps completely after making the hose connection to check for water leaks at the connection points. If any leaks occur, turn off the tap and remove the nut. Retighten the nut carefully after checking the seal. To prevent water leakages and damages caused by them, keep the taps closed when the machine is not in use. Connecting to the drain •... -
Page 5: Disposing Of Packaging Material
• Do not make connections via extension cables or multi-plugs. Damaged power cables must be replaced by the Authorized Service Agents. First use Before starting to use the product, make sure that all preparations are made in accordance with the instructions in sections "Important safety instructions" and "Installation". To prepare the product for washing laundry, perform first operation in Drum Cleaning programme. If your machine is not featured with Drum Cleaning programme, use Cottons-90 programme and select Additional Water or Extra Rinse auxiliary functions as well. Before starting the programme, put max. 100 g of powder anti-limescale into the main wash detergent compartment (compartment nr. II). If the anti- limescale is in tablet form, put only one tablet into compartment nr. II. Dry the inside of the bellow with a clean piece of cloth after the programme has come to an end. -
Page 6: Correct Load Capacity
3 Preparation Things to be done for energy saving Following information will help you use the product in an ecological and energy-efficient manner. • Operate the product in the highest capacity allowed by the programme you have selected, but do not overload; see, "Programme and consumption table". • Always follow the instructions on the detergent packaging. • Wash slightly soiled laundry at low temperatures. • Use faster programmes for small quantities of lightly soiled laundry. • Do not use prewash and high temperatures for laundry that is not heavily soiled or stained. •... - Page 7 compartment (compartment nr. I). • Do not select a programme with prewash if you are using a detergent bag or dispensing ball. Place the detergent bag or the dispensing ball directly among the laundry in the machine. • If you are using liquid detergent, do not forget to place the liquid detergent cup into the main wash compartment (compartment nr. II). Choosing the detergent type The type of detergent to be used depends on the type and colour of the fabric. • Use different detergents for coloured and white laundry. • Wash your delicate clothes only with special detergents (liquid detergent, wool shampoo, etc.) used solely for delicate clothes. • When washing dark coloured clothes and quilts, it is recommended to use liquid detergent. • Wash woolens with special detergent made specifically for woolens. Use only detergents manufactured specifically for washing machines.
- Page 8 rinse and add the bleaching agent while the machine is taking water from the detergent compartment during first rinsing step. • Do not use bleaching agent and detergent by mixing them. • Use just a little amount (approx. 50 ml) of bleaching agent and rinse the clothes very well as it causes skin irritation. Do not pour the bleaching agent onto the clothes and do not use it for coloured clothes. • When using oxygen based bleaches, follow the instructions on the package and select a programme that washes at a lower temperature.
-
Page 9: Tips For Efficient Washing
Tips for efficient washing Light colours and whites (Recommended temperature range based on soiling level: 40-90C) It may be necessary to pre-treat the stains of perform prewash. Powder and liquid detergents recommended Heavily Soiled for whites can be used at dosages (difficult stains recommended for such as grass,... -
Page 10: Operating The Product Control Panel
4 Operating the product Control panel Spin Speed Adjustment button Display Temperature Adjustment button Programme Selection knob On / Off button Display symbols - Spin Speed indicator - Temperature indicator - Spin symbol - Temperature symbol - Remaining Time and Delayed Start indicator - Programme Indicator symbols (Prewash / Main Wash / Rinse / Softener / Spin) - Economy symbol - Delayed Start symbol - Door Locked symbol - Start symbol - Pause symbol - Auxiliary Function symbols m - No Water symbol Delayed Start buttons (+ / -) Auxiliary Function buttons... -
Page 11: Main Programmes
soiling and permissible water temperature. Always select the lowest required temperature. Higher temperature means higher power consumption. For further programme details, see "Programme and consumption table". Main programmes Depending on the type of fabric, use the following main programmes. • Cotone (Cottons) Use this programme for your cotton laundry (such as bed sheets, duvet and pillowcase sets, towels, bathrobes, underwear, etc.). Your laundry will be washed with vigorous washing action for a longer washing cycle. • Sintetici (Synthetics) Use this programme to wash your synthetic clothes (shirts, blouses, synthetic/cotton blends, etc.). It washes with a gentle action and has a shorter washing cycle compared to the Cottons programme. -
Page 12: Temperature Selection
machine. Before selecting this programme, select the desired spin speed and press Start / Pause / Cancel button. The machine will spin the laundry with the set spin speed and drain the water coming out of them. If you wish to drain only the water without spinning your laundry, select the Pump+Spin programme and then select the No Spin function with the help of Spin Speed Adjustment button. Press Start / Pause / Cancel button. Use a lower spin speed for delicate laundries. Temperature selection Whenever a new programme is selected, the maximum temperature for the selected programme appears on the temperature indicator. -
Page 13: Programme And Consumption Table
Programme and consumption table Programme (°C) Cotone Cotone Cotone Antiallergico Cotone Eco 60** Cotone Eco 60** Cotone Eco 40** Cotone Eco Sintetici Sintetici Lavaggio a freddo Quotidiano Eco 40 Mix 40 Intensivo Rapido Rapido Rapido Delicati Lana Lavaggio a mano Tende • : Selectable * : Automatically selected, no canceling. ** : Energy Label programme (EN 60456 Ed.3) *** : If maximum spin speed of the machine is lower then this value, you can only select up to the maximum spin speed. - : See the programme description for maximum load. -
Page 14: Auxiliary Function Selection
Auxiliary function selection Select the desired auxiliary functions before starting the programme. Furthermore, you may also select or cancel auxiliary functions that are suitable to the running programme by pressing the Start / Pause / Cancel button when the machine is operating. For this, the machine must be in a step before the auxiliary function you are going to select or cancel. Depending on the programme, press 2a, 2b, 2c or 2d buttons to select the desired auxiliary function. Symbol of the selected auxiliary function appears on the display. Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active. -
Page 15: Programme Has Started
Set the desired delayed start time by pressing the Delayed Start + or - buttons. Press Start / Pause / Cancel button. Delayed Start symbol illuminates steadily. Pause symbol disappears. Start symbol appears. “:” sign in the middle of the delayed start time on the display starts flashing. Canceling the Delayed Start function If you want to cancel the delayed start countdown and start the programme immediately: Press Start / Pause / Cancel button. “:” sign in the middle of the delayed start time on the display stops flashing. Start symbol disappears. -
Page 16: Maintenance And Cleaning
Do not forget to disable the child lock at the end of the programme if it was enabled before. Otherwise, machine will not allow to select a new programme. Canceling the programme Press and hold Start / Pause / Cancel button for 3 seconds. Start symbol flashes. Symbol of the step at which the programme was cancelled remains lit. " " appears on the display and the programme is cancelled. If you want to open the loading door after you have cancelled the programme but it is not possible to open the loading door since the water level in the machine is above the loading door opening, then turn the Programme Selection knob to Pump+Spin programme and discharge the water in the machine. -
Page 17: Draining Remaining Water And Cleaning The Pump Filter
nuts by hand. Draining remaining water and cleaning the pump filter The filter system in your machine prevents solid items such as buttons, coins and fabric fibers clogging the pump impeller during discharge of washing water. Thus, the water will be discharged without any problem and the service life of the pump will extend. If the machine fails to drain water, the pump filter is clogged. Filter must be cleaned whenever it is clogged or in every 3 months. Water must be drained off first to clean the pump filter. In addition, prior to transporting the machine (eg., when moving to another house) and in case of freezing of the water, water may have to be... -
Page 18: Technical Specifications
Figures in this manual are schematic and may not match the product exactly. Values stated on the product labels or in the documentation accompanying it are obtained in laboratory conditions in accordance with the relevant standards. Depending on operational and environmental conditions of the product, these values may vary. This appliance’s packaging material is recyclable. Help recycle it and protect the environment by dropping it off in the municipal receptacles provided for this purpose. Your appliance also contains a great amount of recyclable material. It is marked with this label to indicate the used appliances that should not be mixed with other waste. This way, the appliance recycling organised by your manufacturer will be done under the best possible conditions, in compliance with European Directive 2002/96/EC on Waste Electrical and Electronic Equipment. Contact your town hall or your retailer for the used appliance collection points closest to your home. We thank you doing your part to protect the environment. LBS107F 230 V / 50Hz 2200 1000 1.40 0.20... -
Page 19: Troubleshooting
7 Troubleshooting Programme cannot be started or selected. • Washing machine has switched to self protection mode due to a supply problem (line voltage, water pressure, etc.). >>> Press and hold Start / Pause button for 3 seconds to reset the machine to factory settings. (See "Canceling the programme") Water in the machine. • Some water might have remained in the product due to the quality control processes in the production. >>> This is not a failure; water is not harmful to the machine. Machine vibrates or makes noise.