Table of Contents
Advertisement
User Guide
EC-C1700B-420
Safety information
©
Danfoss | June 2023
Maximum operation temperature must not be exceeded to avoid permanent damage to the
electrical device.
The requirements of this user guide and other related instructions and standards must be
followed.
Do not touch the electric device during operation. The surface of the electric device can be
hot.
This electric device is intended for professional use as complete equipment or system and as
part of a fixed installation. The electric device uses high voltages and currents, and it has
large amounts of stored electrical energy. Close attention is required to system design and
electrical installation to avoid hazards in either normal operation or in the event of
equipment malfunction.
The electric device can only be used in the applications it is intended for. The rated nominal
values and operational conditions are shown in the rating plate.
BC454142332191en-000101 | 17
Advertisement
Table of Contents
