Intended Use Of The User Guide; Product Naming Convention - Danfoss EC-C1700B-420 User Manual

User Guide
EC-C1700B-420
General information

Intended use of the user guide

Product naming convention

© Danfoss | June 2023
This user guide contains the installation, operation and maintenance instructions for the EC-C1700B-420
electrical converter.
This user guide contains instructions necessary to safely and properly handle, install and maintain the
electric device. They should be brought to the attention of anyone who installs or maintains the electric
device or associated equipment.
All of the safety warnings and instructions in this user guide must be followed to prevent injury to
personnel or damage to property. Only qualified and authorized personnel, familiar with health and
safety requirements and national legislation, shall be permitted to handle, install and maintain the
device.
This user guide must be kept for future reference during installation, operation and maintenance.
This user guide uses illustrations as examples only. Illustrations in this user guide may not necessarily
reflect all system features.
In this user guide, the EC-C1700B-420 electric converter is referred to as the electric device.
The following naming convention is used to refer to electric device type code and options:
•
EC-C1700B-420-L-SW11+MC/+AFE/+UG
The rating plate of the electric device has the correct name of that particular electric device.
Part of the name
EC
C1700B
420
L
SW11
+MC*
+AFE*
+UG*
*Followed with number that represents the nominal current (A
available on the same electric device or alone.
Options are presented in the Table below. Standard options are indicated by a star (*).
EC-C1700B-420 options
Variant Code
Hardware variant -L
Software version -SW11
Explanation
Electric Converter
Product name part 1
Product name part 2
Hardware variant
Software version
Motor Control software -option
Active Front End software -option
Microgrid (µgrid) software -option
): 95, 130, 175, 210. These options are
RMS
Description
Device internal components
Software version 11.x
Additional information
Definition for isolation
resistance, discharge
resistor and y-capacitance
sizing
Software version of the unit
is the latest version of 11-
series software
BC454142332191en-000101 | 5