Table of Contents
Advertisement
User Guide
EC-C1700B-420
Installation
50 |
©
Danfoss | June 2023
Cutting the inner sheath
6. Make sure that the conducting strands of the cable are completely free of silicone and other impurities.
Place the cable inside the cable lug body, and crimp the cable lug twice in different places. See Figure
below.
Connecting cable lug
7. Cut piece of shrink tube and shrink it over the cable lug and braid screen as shown in Figure below.
This is done to keep the braid screen in place and for extra insulation.
The shrink tube must be specified for operating temperature range from -40°C to +150°C. Self
adhesive shrink tube is recommended.
BC454142332191en-000101
Advertisement
Table of Contents
