Transportation And Storage; Transportation; Receiving And Unpacking; Lifting - Danfoss EC-C1700B-420 User Manual

User Guide
EC-C1700B-420

Transportation and storage

Transportation

Receiving and unpacking

Lifting

© Danfoss | June 2023
Do not apply any excess weight on the electric device during transportation.
See the weight of the electric device from the product Data sheet.
The electric device is shipped in first class condition. Products are inspected and packed correctly to
prevent damage from ordinary handling during the transportation. Transportation conditions must be in
accordance with the product specification and shocks of any kind must be avoided.
Plug and seal the cabling and cooling connections for transportation.
Inspect the electric device and the package immediately upon arrival. Ensure that the rating plate data in
the cover letter complies with the purchase order. All external damage in the package or in the electric
device must be photographed and reported to Danfoss immediately.
Use correct, adequately dimensioned lifting devices and inspect them before lifting.
Do not apply any excess weight on the electric device when lifting it.
Use correct lifting slings. Use correct position and angle of lifting. The maximum permissible
range of lifting angles is shown in lifting figures.
Make sure that lifting slings are correctly routed so that they do not cause momentum on any
of the signal connectors.
See the rating plate and data sheets for weight information.
Lift the electric device using the correct lifting lugs/eyes only. See the lifting Figures in this
Chapter.
BC454142332191en-000101 | 27