Display Of The Current Charge Level During The Charging Process; Cockpit App; System Requirements - Otto Bock Genium X3 3B5-3 Instructions For Use Manual

6.3.3 Display of the current charge level during the charging process

During the charging process, the current battery charge level is indicated by the number of LEDs
lit on the side of the charger.

7 Cockpit app

Information on the Cockpit app
• The Cockpit app can be downloaded free of charge from the respective online store. For
more information, please visit the following website: https://www.ottobock.com/cockpitapp.
To download the Cockpit app, the QR code on the supplied Bluetooth PIN card can also be
read with the mobile device (requirement: QR code reader and camera).
• The language of the user interface in the Cockpit app can be changed using the adjustment
software.
• Depending on the version of the Cockpit app being used, the language of the user interface in
the Cockpit app corresponds to the language of the mobile device on which the Cockpit app
is being used.
• The serial number of the component to be connected has to be registered with Ottobock the
first time it is connected. If the registration is not accepted, use of the Cockpit app for this
component will be limited.
• Bluetooth on the prosthesis must be turned on in order to use the Cockpit app.
If Bluetooth is switched off, it can be turned on by turning the prosthesis upside-down (sole of
the foot must point up) or by connecting/disconnecting the battery charger. Bluetooth is then
turned on for approx. 2 minutes. During this time, the app must be started and used to estab­
lish a connection. If required, Bluetooth on the prosthesis can be switched on permanently
afterwards (see page 81).
• Keep the mobile app up to date at all times.
• Please contact the manufacturer if you suspect cybersecurity problems.

7.1 System Requirements

See the information in the Apple App Store or Google Play Store regarding compatibility with
mobile devices and versions.
70
1.
component
The Cockpit app enables switching from basic mode to the pre-configured
MyModes. In addition, information about the product (step counter, battery
charge level, etc.) can be retrieved.
The everyday behaviour of the product can be changed to a certain extent
using the app (e.g. while becoming accustomed to the product). The O&P
professional can use the adjustment software to track these changes at the
next appointment.
38% – Charge level of battery for currently connected
Quantity Battery charge level
0
1
2
3
4
5
0%-10%
10%-30%
30%-50%
50%-70%
70%-90%
> 90%