Advertisement
Remove the fork protector mounting bolts [1] and fork
protectors [2].
Left side shown:
Loosen the fork top bridge pinch bolts [1].
If you plan to disassemble the fork, perform the following
procedure:
Over-tightening the fork bottom bridge pinch bolts can
deform the outer tube. A deformed outer tube must be
replaced.
1. Loosen the fork bottom bridge pinch bolts [1].
2. Pull the fork leg [1] up and align the fork outer tube
[2]
[1]
3. Tighten the fork bottom bridge pinch bolts [1].
4. Loosen the fork bolt [1], but do not remove it yet.
[1]
[1]
lower index line with the top bridge upper surface.
Position the fork leg in the direction as shown.
Left side shown:
[1]
TORQUE: 20 N·m (2.0 kgf·m, 15 lbf·ft)
Loosen the fork damper [2] using the special tool, but
do not remove it yet.
TOOL:
Lock nut wrench, 50 mm [3] 07WMA-KZ30100
[1]
Maintenance
Align
[1]
[2]
[3]
2-65
Advertisement
