Advertisement
Check the fork center bolt lock nut [1] is installed on the
fork damper piston rod [2] properly.
• If the lock nut was removed, the piston rod will fall into
the fork damper and you will not be able to
reassemble the fork damper.
[2]
Loosen the fork bolt [1].
[1]
Remove the fork bolt assembly [1] from the fork damper
[2] while pumping the piston rod [3] slowly.
[1]
[2]
[1]
[3]
Remove the piston ring [1] and O-rings [2] from the fork
bolt assembly.
• Do not disassemble the fork bolt assembly.
• Be careful not to damage the slider bushings [3].
[2]
[3]
[1]
[3]
Empty the fork oil from the fork damper [1] by pumping
the piston rod several times.
Maintenance
[1]
2-77
Advertisement
