Advertisement
dummyhead
dummyhead
FRONT VISOR
REMOVAL/INSTALLATION
Remove the bolt/washers [1].
Release the front visor bosses [2] from the front fender.
Release the turn signal relay [3] from the stay [4].
Release the wire clip [5] from the front visor [6].
Remove the wire clamp [7].
Disconnect the headlight 3P connector [8].
Remove the front visor.
Remove the flange collars [9] and grommets [10] from the front visor.
Installation is in the reverse order of removal.
• Route the wires properly as shown.
[5]
[3]
[9]
[8]
Frame/ Body Panels
[10]
[1]
[7]
[6]
[4]
[2]
1-5
Advertisement
