Advertisement
Make sure that the index line on the cam sprocket aligns
with the camshaft holder mating surface.
Align
Install the set rings [1] into the camshaft bearing grooves.
• Be careful not to drop the set rings into the crankcase.
Install the camshaft holder [2] by aligning their grooves
with the set rings and dowel pins with the camshaft
holder base holes [3].
• Install the camshaft holder with its " " mark [4] facing
exhaust side.
Apply engine oil to the camshaft holder mounting bolt
threads and seating surface.
Install the camshaft holder mounting bolts (long) [5] and
camshaft holder mounting bolts (short) [6].
• Align the rocker arm shaft cut-outs with the camshaft
holder mounting bolts.
Tighten the camshaft holder mounting bolts to the
specified torque.
TORQUE: 15 N·m (1.5 kgf·m, 11 lbf·ft)
[1]
[3]
[5]
[2]
[6]
Maintenance
[5]
[4]
[6]
2-31
Advertisement
