Advertisement
INSTALLATION
Apply molybdenum disulfide grease to the sidestand
sliding surface 2-6.
Install the sidestand [1].
Install and tighten the sidestand pivot bolt [2] to the
specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
After tightening the sidestand pivot bolt, return it 45° –
90°.
Install and tighten the sidestand pivot nut [3] to the
specified torque while holding the sidestand pivot bolt.
TORQUE: 39 N·m (4.0 kgf·m, 29 lbf·ft)
Install the sidestand spring [4].
[4]
[2]
Install the sidestand switch [1] and new sidestand switch
bolt [2].
Tighten the sidestand switch bolt to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
• Align the sidestand switch tab [3] with the sidestand
• Align the sidestand switch groove [5] with the left step
[1]
Install the sidestand switch cover [1] and bolts [2].
Tighten the bolt securely.
Install the following:
[3]
– Left side cover 1-4
– Engine guard 1-7
hole [4].
bracket pin [6].
[2]
[1]
[2]
Frame/ Body Panels
[6]
[5]
[4]
[3]
[1]
1-19
Advertisement
