Advertisement
REAR FRAME
REMOVAL/INSTALLATION
Remove the seat 1-3.
Remove the battery terminal bolt [1].
Disconnect the battery negative (–) cable [2].
Release the terminal cover [3].
Remove the battery terminal bolt [4].
Disconnect the battery positive (+) cable [5].
Remove the battery band [6] and battery [7].
[4]/[5]
[7]
[6]
Remove the following:
– Muffler 1-15
– Rear fender B 1-11
Hang the seat support base 1-3.
Remove the wire band [1] and water guard rubber [2].
[2]
[3]
[1]/[2]
[1]
Remove the wire bands [1].
Remove the bolts A [2], bolts B [3], and flange collars [4].
[1]
[2]
[1]
[3]/[4]
Release the battery positive (+) cable clip [1].
Remove the bolt [2] and release the starter relay stay [3].
[2]
[3]
[1]
Disconnect the crankcase breather hose B [1] and air
suction hose [2].
[1]
Frame/ Body Panels
[1]
[2]
[1]
[3]/[4]
[2]
1-13
Advertisement
