Advertisement
Maintenance
Assemble the air cleaner element [1] and element holder
[2].
Hook the element hole [3] onto the holder tab [4].
[4]
[3]
[2]
Apply 1.5 – 5.5 g (0.1 – 0.2 oz) of grease to the air
cleaner element contacting area of the air cleaner
housing [1].
Install the air cleaner element [2].
Install the air cleaner element set bolt [3] and tighten it to
the specified torque.
TORQUE: 2.4 N·m (0.2 kgf·m, 1.8 lbf·ft)
• If the air cleaner assembly is not installed correctly,
dirt and dust may enter the engine, resulting in wear of
the piston ring and cylinder.
[2]
2-20
[1]
[1]
[3]
Install the air cleaner lid [1].
Hook the air cleaner lid spring [2].
Install the bolts [3] and tighten them securely.
[3]
CRANKCASE BREATHER
INSPECTION
Remove the drain plug [1], then drain any fluid or dirt into
a proper container from the crankcase breather hose [2].
Reinstall the drain plug.
[2]
[1]
[2]
[1]
Advertisement
