Advertisement
Install the fuel pump unit [1] into the fuel tank [2] with the
fuel joint [3] facing forward.
• Be careful not to damage the fuel pump unit.
[2]
[3]
Install the fuel pump plate [1] with the " " mark [2] facing
outside.
• Align the fuel pump plate groove with the fuel pump
unit lug.
• Make sure that the dust seal lip [3] aligned with the
index mark [4] of the plate.
[1]
[2]
[1]
[4]
Align
[3]
Install the following:
– Conical spring washers [1]
– Collars [2]
– Washers [3]
– Stay [4]
– Fuel pump mounting nuts [5]
– Fuel pump mounting cap nut [6]
• Install the conical spring washers in the shown
direction.
• Install the cap nut so that it is neighbored the " " mark
[7] on the fuel pump plate.
Tighten the fuel pump mounting nuts and fuel pump
mounting cap nut to the specified torque in the specified
sequence as shown.
TORQUE: 11 N·m (1.1 kgf·m, 8 lbf·ft)
Connect the quick connect fitting to the fuel pump unit
side 2-10.
1
[4]
[1]
6
[7]
Fuel tank side
Maintenance
[1]/[2]/[3]/[5]
3
5
2
4
[1]/[2]/[3]/[6]
2-17
Advertisement
