Advertisement
ENGINE OIL CHANGE
ENGINE OIL DRAINING
Remove the engine guard 1-7.
Start the engine and let it idle for 3 minutes.
Support the motorcycle upright on a level surface.
Place an oil pan under the engine to catch the engine oil,
then remove the engine oil drain bolt [1] and O-ring [2].
Remove the oil filler cap/dipstick [3].
Drain the engine oil.
[1]
[2]
ENGINE OIL FILLING
Apply engine oil to the engine oil drain bolt threads and a
new O-ring whole surface.
Install a new O-ring [1] to the oil drain bolt [2].
Install the engine oil drain bolt and tighten it to the
specified torque.
TORQUE: 18 N·m (1.8 kgf·m, 13 lbf·ft)
Fill the engine with the recommended engine oil 2-32.
ENGINE OIL CAPACITY:
1.10 liters (1.16 US qt, 0.97 Imp qt) at draining
1.15 liters (1.22 US qt, 1.01 Imp qt) at oil filter change
[3]
1.45 liters (1.53 US qt, 1.28 Imp qt) at disassembly
Recheck the oil level 2-32.
Make sure there are no oil leaks.
Install the engine guard 1-7.
Maintenance
[2]
[1]
2-33
Advertisement
