Advertisement
HOW TO USE THE COMPRESSION ADJUSTER
The compression damping force can be adjusted from
the softest to the stiffest with 16 clicks (4 clicks / 1
rotation) or more by the compression adjuster [1] of the
fork cap.
Turning clockwise (H) turns stiffer, turning
counterclockwise (S) turns it softer.
• Always start with full hard when adjusting
damping.
• Do not turn more than 16 clicks from the stiffest
position.
It causes damage to the fork.
• Be sure to stop the adjuster at the click position.
• For suspension adjustment guideline 3-9.
HOW TO SET THE STANDARD POSITION
1. Turn the adjuster clockwise (H) until it stops (stiffest
position).
2. Turn counterclockwise (S) direction from the stiffest
position.
The first click is confirmed as 1 click, and the 7 clicks
is the standard position.
3. Make sure to the same position on both sides.
[1]
HOW TO USE THE REBOUND ADJUSTER
The rebound damping force can be adjusted from the
softest to the stiffest with 16 clicks (4 clicks / 1 rotation) or
more by the rebound adjuster [1] of the fork center bolt.
Turning clockwise (H) turns stiffer, turning
counterclockwise (S) turns it softer.
• Always start with full hard when adjusting
damping.
• Do not turn more than 16 clicks from the stiffest
position.
It causes damage to the fork.
• Be sure to stop the adjuster at the click position.
• For suspension adjustment guideline 3-9.
HOW TO SET THE STANDARD POSITION
1. Turn the adjuster clockwise (H) until it stops (stiffest
position).
2. Turn counterclockwise (S) direction from the stiffest
position.
The first click is confirmed as 1 click, and the 12 clicks
is the standard position.
3. Make sure to the same position on both sides.
Setting Information
[1]
3-5
Advertisement
