Advertisement
Maintenance
4. When the fork bolt is removed, tighten the fork bolt [1]
to the specified torque.
TORQUE: 30 N·m (3.1 kgf·m, 22 lbf·ft)
5. Loosen the fork bottom bridge pinch bolts [1].
Position the fork outer tube so the fork plug bolt [1] is in
position forward.
Align fork outer tube upper index line with the top surface
of the top bridge as shown.
[1]
2-74
Tighten the fork bottom bridge pinch bolts [1] to the
specified torque.
TORQUE: 20 N·m (2.0 kgf·m, 15 lbf·ft)
[1]
Over-tightening the fork bottom bridge pinch bolts can
deform the outer tube. A deformed outer tube must be
replaced.
Tighten the fork top bridge pinch bolts [2] to the specified
torque.
TORQUE: 22 N·m (2.2 kgf·m, 16 lbf·ft)
Over-tightening the fork top bridge pinch bolts can
deform the outer tube. A deformed outer tube must be
replaced.
[1]
Install fork protectors [1] and new fork protector mounting
bolts [2].
Tighten the fork protector mounting bolts to the specified
torque.
TORQUE: 7.0 N·m (0.7 kgf·m, 5.2 lbf·ft)
Install the front wheel 2-76.
Left side shown:
Align
[2]
[1]
[1]
[2]
Advertisement
