Advertisement
Maintenance
Loosen the handlebar lower holder nuts [1].
Remove the rear handlebar upper holder bolts [2], front
handlebar upper holder bolts [3], handlebar upper
holders [4] and handlebar [5].
Remove the handlebar lower holder nuts, washers [6],
bushings [7], and handlebar lower holders [8].
[4]
[3]
[8]
[7]
[1]/[6]
FRONT FORK REMOVAL
Remove the following:
– Front brake disc cover 1-6
– Handlebar and holders 2-63
Record the present positions of the compression
damping adjuster [1] and rebound damping adjuster [2].
Turn the compression and rebound damping adjusters
counterclockwise and set them in the full soft position.
[1]
2-64
[2]
[3]
[4]
[5]
[2]
[8]
[7]
[2]
Release the wire clip [1].
Remove the bolt [2] and wheel speed sensor [3].
Remove the front brake caliper mounting bolts [4] and
front brake caliper/bracket assembly [5].
• Do not suspend the brake caliper/bracket assembly
from the brake hose.
• Do not twist the brake hose.
• Do not operate the brake lever after removing the
caliper/bracket assembly.
[3]
[2]
Remove the front wheel 2-63.
Remove the bolts [1] and brake hose clamp [2].
[2]
[1]
[4]
[5]
[1]
Advertisement
