Advertisement
Frame/ Body Panels
Remove the bolts [1] and left crankcase over cover [2].
[1]
[2]
INSTALLATION
Install the left crankcase over cover [1] and bolts [2].
Tighten the bolts securely.
[2]
[1]
1-8
Install the gearshift pedal [1].
• Align the gearshift pedal slit with the punch mark of
the gearshift spindle.
Install and tighten the gearshift pedal pinch bolt [2] to the
specified torque.
TORQUE: 12 N·m (1.2 kgf·m, 9 lbf·ft)
Check the dimension between the gearshift pedal end
and "HONDA" logo as shown.
Move the gearshift pedal and check the shift mechanism
for smooth operation.
Install the engine guard 1-7.
• Route the hose properly as shown.
[1]
90 mm (3.5 in)
Align
[2]
Advertisement
