Oxi 3310 IDS (Oxi 3315)
If the memory is full
ba75944e02
10/2014
7
Data memory
You can store measured values (datasets) to the data memory:
Manual data storage (see section 7.1 M
Automatic data storage at intervals (see section 7.2 A
, page 40)
AGE AT INTERVALS
Each data storage process transmits the current dataset to the interface at the
same time.
7.1
Manual storage
You can store a measurement dataset to the data memory as follows. The
dataset is at the same time output to the interface:
1.
Press the <STO> key shortly.
The menu for manual data storage appears.
Manual data storage 4 von 500
01.02.2014 07:43:33
Ox 7.88 mg/l
24.8 °C AR +++
t90 = 30 s
ID number:
continue
01.02.2014
Back
08:00
2.
If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
When all memory locations are occupied, it is not possible to continue storing.
Then you can e.g. store the data from the memory to a PC (see section 7.3.1
E
DITING THE MEASUREMENT DATA MEMORY
the data memory (see section 7.3.2 E
page 43).
ANUAL STORAGE
UTOMATIC DATA STOR
1
, page 42) and subsequently erase
RASING THE MEASUREMENT DATA MEMORY
Data memory
, page 39)
-
,
39