Data Storage; Manual Storage - wtw Oxi 3315 Operating Manual

Data storage

If the storage is full
38
7 Data storage
You can transmit measured values (datasets) to the data storage:
 Manual data storage (see section 7.1 M
 Automatic data storage at intervals (see section 7.2 A
, page 39)
INTERVALS
Each storage process transmits the current dataset to the interface at the same
time.
7.1

Manual storage

You can transmit a measurement dataset to the data storage as follows. The
dataset is at the same time output to the interface:
1. Press the <STO> key shortly.
The menu for manual storage appears.
Manual data storage 4 von 500
01.09.2011 07:43:33
Ox 7.88 mg/l 24.8 °C AR +++
t90 = 30 s
ID number:
continue
01.09.2011
Back
08:00
2. If necessary, change and confirm the ID number (1 ... 10000) with
<><> and <ENTER>.
The dataset is stored. The meter switches to the measured value dis-
play.
When all storage locations are occupied, it is not possible to continue storing.
Then you can e.g. transmit the stored data to a PC (see section 7.3.1 E
THE MEASUREMENT DATA STORAGE
storage (see section 7.3.2 E
42).
ANUAL STORAGE
1
, page 41) and subsequently erase the data
RASING THE MEASUREMENT DATA STORAGE
Oxi 3315
, page 38)
UTOMATIC STORAGE AT
DITING
, page
ba75944e02 03/2012