Table of Contents
Advertisement
4.5.2
Operating Controls
A
Separation adjustment wheel
B
Side guides
C
Hopper side guide adjustment thumbwheel
D
Release handle separation unit
E
Release handle feed unit
F
Feed unit push down area
4.5.3
Side Guide Adjustment
The side guides can be adjusted manually as
follows:
1.
Place a stack of documents into the feeder.
2.
Adjust the hopper side guides B by turning the
thumbwheel C.
Provide just enough space for the documents to
move freely. Too much play causes skewing.
4.5.4
Document Separation Adjustment
When adjusting the document separation take into account the tensive force
of the separation rollers.
Note
Check before the adjustment that the release handle D for the separation unit is in the
closed (down) position.
The document separation can be adjusted manually
as follows:
1.
Turn the separation adjustment wheel A counter
clockwise until a document can be moved
backwards and forwards without resistance.
2.
Turn the separation adjustment wheel clockwise
until a slight resistance is felt on the document
when the document is moved backwards and
forwards.
A
B
D
C
E
F
B
C
A
65
Advertisement
Table of Contents
