Table of Contents
Advertisement
Chapter 5 Trouble Guide
,.
Error Code
Check the error code or error message and solve the problem by following the guide displayed on the screen
or by referring to list below. If the error cannot be solved by the following methods, contact your dealer.
Depending on the content of the error, the � key might not be displayed.
If the � key is displayed, check the guide content and touch the � key to clear the error.
If the � key is not displayed, follow the guide to clear the error.
1-1.
Warning error
Error code and error messages
Error Code
U1000
The top
cover
U1500
The folding plate 1 is not attached.
U1501
The folding plate 2 is not attached.
U1550
A foreign object was detected under
the paper feed tray.
U1602
The¢ key is pressed in a state where
test paper feeding is not performed
when the optical sensor is set for
double-feed detection.
U2005
The direction of paper stacked on the
paper feed tray is incorrect.
U2006
Paper is not detected when the paper
feed tray is going up.
Back and forth of paper stacked on the
paper feed tray is not in alignment.
The volume of the paper separating air
is small for the paper size.
U2008
The paper feed guides detect invalid
paper sizes.
U3006
The setting for the small size paper is
not correct.
86
U2001
Guide
__
I
Load pap e r in
Cause
is open.
Close the top
Attach the folding plate 1 correctly.
Attach the folding plate 2 correctly.
Check if there is a foreign object under the paper feed tray.
Perform a test feed or change the setting of double-feed
detection.
Load paper in the correct direction.
Check if the paper size setting is correct.
Touch the� key to clear the error.
Align the paper.
Align the paper.
Increase the setting value by five at a time.
Match the paper feed guides to the size of the paper.
Touch the� key to release the error.
Touch the
the small size paper.
Paper Empty
paper reed
tray.
the
Solution
cover.
L..f_J
key to clear the error, then make settings for
IT]
Advertisement
Table of Contents
