Trouble Shooting - Formax FD 380 Operator's Manual

TROUBLE-SHOOTING
TROUBLE
Control panel lights are
not illuminated.
Fold plate stop not
moving when "Test"/
"Start" is pressed.
"Cover Open" is
displayed.
"Paper out" is displayed.
"Paper Jam" is displayed. Paper misfeed
Black marks on the folded
paper.
Fold is skewed.
Stacker belts do not turn.
Documents are wrinkled
or crunched.
In-feed tray lever does
not work.
Double feeding forms
Not feeding documents
POSSIBLE CAUSE
No power at the wall outlet.
No power to the machine inlet.
No power to the control panel.
Internal electrical failure.
Fold plate is not plugged in.
Electrical or mechanical failure
Cover open
Magnetic switch is broken.
In-feed tray is empty.
Paper jammed at exit of folder.
In-feed tires, separator, and/or
fold rollers are dirty.
In-feed tray is out of
adjustment.
Broken drive belt, worn drive
gear.
Fold plates are not inserted
correctly.
Piece of paper or other material
is stuck in the fold plate.
Broken spring
Documents stuck together
Feed tire or separator worn
Feed tire dirty
Feed tire or separator worn
REMEDY
Check wall outlet.
Check power cord for frayed/broken
wires.
Press the button on the circuit breaker.
Call for service.
Plug fold plate in.
Call for service.
Close cover.
Call for service.
Place documents on the in-feed tray.
Reload paper and press "Counter Reset"
button.
Remove paper and press "Counter
Reset" button.
Clean the parts with approved roller
cleaner and rejuvenator.
Turn skew adjuster knob to remove the
skew.
Call for service.
Remove and reinstall fold plates. Be
sure they're properly positioned.
Remove object from the fold plate.
Call for service
Jog forms to remove static electricity.
Call for service
Clean feed tire
Call for Service
11