Table of Contents
Advertisement
Appendix D: Board Setup
8.
98
Send Feedback
b. Plug the 4-pin 1 x 4 Molex connector on the opposite end of the adapter cable into
an ATX power supply cable bundle mating 4-pin 1 x 4 peripheral power
connector.
Caution!
Do NOT plug a PC ATX power supply 6-pin connector into J18 on the VC709 board.
The ATX 6-pin connector has a different pinout than J18. Connecting an ATX 6-pin connector into
J18 may damage the VC709 board and void the board warranty.
Slide the VC709 board power switch SW12 to the ON position. The PC can now be
plugged in and powered on.
www.xilinx.com
VC709 Evaluation Board
UG887 (v1.4) December 4, 2014
Advertisement
Table of Contents
