Christie CP4230 Service Manual page 97

4. Close the lamp door.
5. Turn wall circuit ON.
6. Perform software adjustments. In the Advanced Setup: Lamp History window,
and record lamp type, serial number, reason for change and number of the hours logged on to the lamp. If
the lamp has not been previously used, enter 0. Press Save to enter the data. (Figure 5-60)
7. Power the lamp ON.
8. Tap
ON.
9. Immediately adjust the lamp position (LampLOC
Advanced Setup: LampLOC window. By adjusting lamp
position, you can achieve optimized light output by
centering the lamp with the reflector and obtaining correct
distancing from the center of the illumination system.
CP4230 Service Manual
020-100622-04 Rev. 1 (05-2016)
from the TPC Main panel to power the lamp
Section 5: Parts and Module Replacement
) via the
™
Figure 5-60 Add Lamp Window
tap Add Lamp button
5-41